§ 64.502. RL—RM3 residential and entirely residential uses in T1—T4 traditional neighborhood districts.

(a)

Identification signs:

(1)

For one- and two-family structures and bed and breakfast residences, one identification sign not exceeding a total of two (2) square feet in area.

(2)

For multiple-family structures on parcels twenty-five thousand (25,000) square feet or smaller, one (1) identification sign for each street frontage is allowed. No sign shall exceed six (6) square feet in size. For multiple-family structures on parcels larger than twenty-five thousand (25,000) square feet, one (1) or two (2) identification sign(s) on each street frontage is/are allowed. The total amount of signage on each frontage shall not exceed twenty-four (24) square feet in size.

(3)

For structures other than residential uses, one identification sign for each street frontage not exceeding a total of thirty (30) square feet in area.

(4)

For parks, community centers, and religious, civic, educational or philanthropic institutions, one (1) identification sign, not exceeding a total of thirty (30) square feet in area for each street frontage, and one (1) bulletin board not exceeding a total of thirty (30) square feet in area. Such bulletin board signs may be signs with dynamic display, which shall be monochromatic, shall not scroll or change their displays faster than every twenty (20) minutes, and shall be turned off between 10:00 p.m. and 7:00 a.m.

(5)

No sign shall project higher than thirty (30) feet above grade.

(6)

If located within a required yard, a freestanding sign may not exceed four (4) feet in height plus two (2) inches for each foot set back from the property line.

(7)

Signs with dynamic display are not permitted in residential zoning districts except as provided in section 64.502(a)(4).

(b)

Temporary signs:

(1)

For new subdivisions or new multiple-family developments, one (1) real estate development sign not exceeding a total of fifty (50) square feet in area within the subdivision or on the multiple-family lot, per three hundred (300) feet or less of lot frontage. No such sign shall be located in any required yard.

(2)

For all uses, one (1) real estate sign not exceeding a total of six (6) square feet in area.

(3)

For all uses, two (2) signs not exceeding a total of fifty (50) square feet in area identifying an engineer, architect or contractor engaged in, or product used in, the construction of a building.

(4)

For parks, community centers, and religious, educational, civic or philanthropic institutions, portable signs and temporary signs are permitted for special events under the following conditions:

a.

Portable signs:

1.

On zoning lots with a street frontage of three hundred thirty (330) feet or less, the gross surface display area of the signs shall not exceed one hundred (100) square feet. On zoning lots with a street frontage of over three hundred thirty (330) feet, the gross surface display area of the signs shall not exceed three hundred (300) square feet;

2.

The signs shall be permitted two (2) nonconsecutive times per calendar year for a period of not more than fourteen (14) days per time;

3.

The signs shall not be flashing signs or located in a required yard, required off-street parking space or maneuvering area, or public right-of-way.

b.

Temporary signs.

1.

The gross surface display area of the signs shall not exceed one hundred (100) square feet;

2.

The signs shall be permitted three (3) nonconsecutive times per calendar year for periods of not more than thirty (30) days per time;

3.

The signs shall not be flashing signs or located in a required off-street parking space or maneuvering area, or public right-of-way

(5)

No sign shall project higher than thirty (30) feet above grade.

(C.F. No. 07-39, § 3, 2-21-07; C.F. No. 09-1015, § 1, 12-9-09; Ord. No. 11-27, § 1, 4-20-11; Ord 18-30, § 3, 8-22-18)